|
Plano Miller
Design: It is a very rigid double column and body bore system planer fitted with gun metal bushes.
Lubrication: Automatic lubricating system with suitable forced pump has been provided to facilitate the lubrication of bearing surface. Wiper fitting and oil filter trays have been fitted to keep the 'V' guides clean of oil, to avoid oil wastage and filtering of oil. Provision has been made for oiling the gears from outside.
The Bed: The bed is made out of high duty alloys grey casting having proper strength and long wearing qualities. It is deep box section and tied together at frequent intervals by double walled bridge pieces extended to the bottom of bed. The two 'V' guides are accurately hand scrapped upto extreme limits.
The Table: It is of box section with hand scrapped 'V' ways to bear heavy load. It is heavily ribbed and the Rack provided in it is spur milling cut and non wearing quality for smooth running. Adequate number of 'T' slots are provided to clamp the work-piece precisely and securely.
The Gearing: The main bearings for gearings are cast solid with the bed and Gear Teeth are Hob Cut. Helical gears are of finest quality material and are strong enough to stand increased cutting and quick return speed Gun metal bearings have been provided for all the shafts and Ball bearings for loose pulleys.
The Cross Rail: It is of box section heavily ribbed with large surface and is suitable for both hand and automatic horizontal and vertical feeds.
The Columns: The uprights are of rigid box section firmly, bolted on the bed for precise alignment are capable of absorbing the heaviest shocks without vibration. Location pins are provided to help refit machine accurately after once it is dismanted. The pillars have been especially designed for the permanent fitting of the side tool posts, which can be moved right upto the surface level on the guide- ways when not required for use.
|
